Quality guides
Quick checks you can do at the shop or on site before paying for materials.
Cement सिमेन्ट
See today's Cement prices- Check the manufacturing date printed on the bag; strength drops noticeably after about 3 months of storage.
- Look for the NS (Nepal Standard) mark and batch number on every bag.
- Cement should feel smooth and cool with no lumps. Lumps mean moisture has got in.
- Use OPC for slabs, columns and early strength; PPC for plaster, masonry and mass concrete.
Rod / TMT Bar छड
See today's Rod / TMT Bar prices- Every bar should be rolled with the brand name, grade (e.g. Fe 500D) and diameter at regular intervals.
- 'D' grades have higher elongation and are better suited to earthquake-prone areas.
- Ask for the mill test certificate for the lot you are buying.
- Avoid bars with heavy rust flakes, cracks at the ribs or uneven ribs.
Bricks & Blocks इँटा
See today's Bricks & Blocks prices- A good brick gives a clear metallic ring when two are struck together.
- Edges should be sharp and the colour uniform, with no black cores or cracks.
- Soak test: a brick should not absorb more than about 20% of its dry weight in 24 hours.
- Drop test: a well-burnt brick should not break when dropped flat from about 1 m.
Sand बालुवा
See today's Sand prices- Rub sand between your palms: if it leaves a stain, it contains too much silt or clay.
- Silt test: in a jar of water, the settled silt layer should be under about 8% of the sand layer.
- Use coarse sand for concrete and fine, well-graded sand for plaster.
- Confirm the truck's actual volume when buying by the load.
Aggregate गिट्टी
See today's Aggregate prices- Aggregate should be angular, hard and free of dust, clay and organic matter.
- Use 3/4 inch for slabs, beams and columns; 1/2 inch for thin sections.
- Wash dusty aggregate before use; dust weakens the bond with cement.
- Avoid flaky or elongated pieces, which reduce concrete strength.
Pipes & Fittings पाइप
See today's Pipes & Fittings prices- Check the pressure rating (PN / kg/cm²) printed along the pipe.
- Use PPR or CPVC for hot water lines; HDPE for underground supply.
- Wall thickness should be even around the whole circumference.
- Buy fittings from the same brand as the pipe for a reliable joint.
Paint रंग
See today's Paint prices- Compare coverage (sq ft per litre per coat), not just price per litre.
- Exterior paint should state weather and algae resistance.
- Check the manufacturing date and that the seal is intact.
- Always apply the primer recommended by the paint brand.
Tiles टायल
See today's Tiles prices- Buy all tiles for one room from the same batch to avoid shade variation.
- Use tiles rated anti-skid (R10 or higher) for bathrooms and outdoor areas.
- Lay two tiles face to face to check they are flat and not warped.
- Order 8-10% extra for cutting and breakage.
Electrical Wires तार
See today's Electrical Wires prices- Check the conductor is bright copper, not copper-coated aluminium.
- Use 1.5 sq mm for lighting, 2.5 sq mm for sockets, 4 sq mm and above for heavy appliances.
- Prefer FR (flame-retardant) insulation for concealed wiring.
- Confirm the actual coil length; short coils are a common problem.
Roofing Sheets जस्तापाता
See today's Roofing Sheets prices- Thickness is critical: measure it with a gauge, as 0.35 mm and 0.40 mm sheets look similar.
- Check the zinc coating (e.g. Z120 or higher) for rust resistance.
- Colour-coated sheets should have an even finish with no peeling at the edges.
- Use matching ridge caps and screws with rubber washers.